Future (awesome) Architecture?

Of cause i will vote Zaha Hadid's works! Innovation Tower at Hong Kong Polytechnic University Beko Master plan Heydar Aliyev...

Final design on Agyness Deyn House

Still the same concept before ( Plan  ) but i try to make the angle more soft and playful to give more characteristic to the design. Wh...

Mini Battleship

Just download the USS New Jersey (BB-62) from Google 3D-warehouse. Without any change and i understand there are problems for sure. For ex...

3rd trial 3d print

In the 1st print of this trial was fail but it produce a really thin layer. Which i don't expect the printer can do this. ...

Brief and Plan

PROGRAM: Bedroom X1 Children room X1 Guest room X1 Living room with bar X1 Music room X1 Kitchen (with pizza oven) X1 Workshop (f...

Agyness Deyn House

1st Assignment - House for Agyness Deyn  Agyness Deyn (Laura Michelle Hollins) BORN : 16 February 1983 Littleborough, Greater Manche...

2nd trial of 3D print

Fail... Product with plate Plate removed The 2nd trial i just make some column to support the cantilever parts. however i did n...

1st trial 3D print

And i know i can use 3D printer to write chinese XDD Something need to be aware, the first layer contact with the plate on the machin...

Laser cut limit test

Trying to test the limit of the laser cut on the box board and found out some part will burn into ash during cutting.

2nd trail for laser cut

The cut finally go through, thanks Tony the workshop manager helps!  Sort out the cuts pieces by pieces is such a pain  Althoug...

Laser cut (with fun!)

Although the 1st trial of laser cut is nearly cutting through the box board, the material, i can say, not bad for image "print" ...

Blue Foam Concept

Starting from basic cube (roughly 40 X 40 X40)  Using the foam cutting tool with other adopter could melt the interior of the foam. ...

how simplify and remove duplicates in the path?

Check this : http://graphicdesign.stackexchange.com/questions/5460/adobe-illustrator-cs5-how-simplify-and-remove-duplicates-in-the-path ...