Boat Shell - Structural Testing

In order to reduce the use of material, the primary structure involves three major beams. The secondary structure is timber, which acts as ...

SolidWorks trial

It is my first time to use Solidwork. I heard most of the industrial designer and student will use this a lot. So it is worth to give a try...

Rhino Grasshopper Trial 3

I have no idea how to make the rigid origami for my roof so i try searching on the internet which i guess grasshopper may help for the situa...

Plaster molding Trial

I am not so familiar with plaster and molding or casting method. Therefore i using this tests to learn and also see how laser cut will help...

VLS 3.50 Laser cutting test file

This file is good for you to test your material is it cut through in any situation. Do this before you cut your actual file! Time : 37s fo...

Cutting 3mm Acrylic

3mm Acrylic (900X600) i also bought at Square House Lab cost AUD 25.44 WARNING: Make sure what kind of acrylic type you ...

Cutting 6mm MDF

6 mm MDF (900X 600) bought at Square House cost AUD 7.77. I use the Lab laser cut machine to cut it in (600 X 300) for the VLS 3....

VLS 3.50 laser cutter issue with template

The laser cutting machine we have have a bit issue, the driver not allow us wot cut mat board more than 2.64 mm. If you enter more than that...

Rhino Grasshopper Trial 2

At this stage i reconsider am i doing the whaffle in free form. However, as mentioned in the concept page i will do the lips form. Which mea...

Rhino Grasshopper Trial

As trial i just simply watch Youtube tutorial and here is the one i follow: However i think i have not build fully according to the...

Mini Battleship

Just download the USS New Jersey (BB-62) from Google 3D-warehouse. Without any change and i understand there are problems for sure. For ex...

3rd trial 3d print

In the 1st print of this trial was fail but it produce a really thin layer. Which i don't expect the printer can do this. ...

2nd trial of 3D print

Fail... Product with plate Plate removed The 2nd trial i just make some column to support the cantilever parts. however i did n...

1st trial 3D print

And i know i can use 3D printer to write chinese XDD Something need to be aware, the first layer contact with the plate on the machin...

Laser cut limit test

Trying to test the limit of the laser cut on the box board and found out some part will burn into ash during cutting.

Testing for the blogger

Testing

Wk 3 Blog submission test

Wk 3 Blog submission test