Plaster molding Trial

I am not so familiar with plaster and molding or casting method. Therefore i using this tests to learn and also see how laser cut will help...

VLS 3.50 Laser cutting test file

This file is good for you to test your material is it cut through in any situation. Do this before you cut your actual file! Time : 37s fo...

Cutting 3mm Acrylic

3mm Acrylic (900X600) i also bought at Square House Lab cost AUD 25.44 WARNING: Make sure what kind of acrylic type you ...

Cutting 6mm MDF

6 mm MDF (900X 600) bought at Square House cost AUD 7.77. I use the Lab laser cut machine to cut it in (600 X 300) for the VLS 3....

VLS 3.50 laser cutter issue with template

The laser cutting machine we have have a bit issue, the driver not allow us wot cut mat board more than 2.64 mm. If you enter more than that...

Laser cut limit test

Trying to test the limit of the laser cut on the box board and found out some part will burn into ash during cutting.

2nd trail for laser cut

The cut finally go through, thanks Tony the workshop manager helps!  Sort out the cuts pieces by pieces is such a pain  Althoug...

Laser cut (with fun!)

Although the 1st trial of laser cut is nearly cutting through the box board, the material, i can say, not bad for image "print" ...